Old Motifator threads are available in the Archive.
jazzmannnn
Total Posts: 8
Joined 02-25-2015 status: Newcomer |
Hi everyone! I would like to know if it’s possible to assign all 8 sliders and/or buttons to the same midi zone in master mode? The reason for this question is i want to controll my Nord stage2 organ sound from the MOtif’s keyboard and assign all the sliders and buttons to drawbars and differents organ settings of the NOrd. I also want to send a program change to the Nord but it has to be on a different channel then the organ engine… So if i use one zone for sending the program change, the corresponding slider and button are no longer available for organ settings.
Anyone can help?
|
Apex
Total Posts: 683
Joined 10-21-2005 status: Guru |
If the nords drawbars can receive midi cc messages then yes this may be possible… But if they are controlled by system exclusive messages then, no I don’t think it will work. |
jazzmannnn
Total Posts: 8
Joined 02-25-2015 status: Newcomer |
Hello Apex! Yes the NOrd can receive midi cc messages. But the problem is on the Motif. In master mode, slider 1 and button 1 is affected to zone 1. Slider 2 and button 2 is affected to zone 2 and so on.. So how is it possible to assign all sliders and buttons to the same zone? |
Apex
Total Posts: 683
Joined 10-21-2005 status: Guru |
Don’t use the “zone” just change all the midi channels to the same channel that your nord is receiving midi data on and that “should” do the trick. |