Old Motifator threads are available in the Archive.
Classicmotif6
Total Posts: 2
Joined 07-24-2014 status: Newcomer |
I want to record digital audio , I have an optical audio cable from motif optical out to vs 1824 optical in.I need the tempo and control commands to sync up, so when I hit record the motif will play and the vs1824 will record. How is this done? Thank you for reading . What I need is the utility settings. Which should be master and which should be slave? Any help is greatly appreciated . Thank you again. |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
To synchronize the two units you’ll need a MIDI cable...MIDI out from the Roland to MIDI in of the Motif. Set the Motif to slave to external MIDI clock (look in the manual on p.258): Utility -> [F5]-[SF3] MIDI Sync = MIDI If the Roland does not send MIDI clock and sequencer commands by default you’ll need to enable that....check it’s manual. |
Classicmotif6
Total Posts: 2
Joined 07-24-2014 status: Newcomer |
Finally got it all synced up! I made that harder then it needed to be. Thanks for your help. |