Old Motifator threads are available in the Archive.
NutMeg
Total Posts: 4
Joined 01-06-2014 status: Newcomer |
Hey Motif community! I actually work at Keyfax (Hi BadMister, we met at a video shoot :) ) and I’m having some problems with the MOXF. I was under the impression that .x3p files from a Motif XF would load onto a MOXF. I updated the firmware on both, re-formatted the usb stick, and tried a handful of other things. I can’t get anything to show up on the usb. I saved ‘all pattern’ from a Motif XF8, and it saved fine as a .x3p file. I plugged the usb into the MOXF6, and nada, nothing shows. The odd thing is that the .x3p files show up when I scroll to the ‘waveform’ category, which obviously they are not. It probably has to do with the fact that saving from the Motif XF gives one the option to save with or without samples, resulting in a .n3.x3p file or just a .x3p. I’ve tried both. Can the MOXF indeed load pattern files? I’ve had previous success with samples and voice banks. Thanks much! |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum. :-) Unfortunately, the sequencer modes (Pattern and Song) of the MOXF aren’t compatible with the XF. The MOXF can load .X4P (MOX) and, of course, .X6P (MOXF) All Pattern files. The MOXF can load only Waveforms (if they exist) from a .X3P file, as you’ve determined. Details are on page 157 of the MOXF Reference Manual. |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
Hi, again, hope you are warmer than it is here in NYC!
Here’s what happening.
In a nutshell:
It can “open”, “read”, and “extract”, this data from Motif XF files.
Since Motif XF Patterns and Songs can contain Waveforms recorded (sampled) via the Integrated Sampling Sequencer.
If you want to transfer MIDI data from the Motif XF sequencer to the MOXF sequencer, you must export it as a SMF (Standard MIDI File).
On the Motif XF call up the Pattern and select the Section you want to export.
Press [ENTER] to execute.
There are enough differences between the Motif XF sequencer and the MOXF sequencer that file compatibility is not direct. Songs can be exported in one Save operation, Patterns must be done Section by Section. |
NutMeg
Total Posts: 4
Joined 01-06-2014 status: Newcomer |
Thanks guys, that answered my question. Plus, now I know for later! Much appreciated. |