Old Motifator threads are available in the Archive.
Joshman
Total Posts: 208
Joined 10-28-2013 status: Enthusiast |
I currently have the MX61 and would like to upgrade to the MOXF6 I also use another keyboard to control the MX when I set up the keyboard to control the mx to change banks and presets I use
Would those numbers be the same for the MOXF6 ? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
With the MX, MSB/LSB = 63/80 would select the Performance Bank.
With the MOFX, there are two Performance Banks:
|
pax_eterna
Total Posts: 209
Joined 11-03-2013 status: Enthusiast |
Slight error 5pin ;-) on the moxf perf bank 1 is MSB 63 LSB 64.. and bank 2 is MSB 63 LSB 65 |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Oops, you’re right. I accidentally gave the hex (rather than decimal) value for each of the MOXF LSBs. Thanks for the correction. |
Joshman
Total Posts: 208
Joined 10-28-2013 status: Enthusiast |
Ah Yes .. I just saw that post now.. I was experimenting and thought that I was going Crazy .. LoL
Also Discovered that for a Voice Change:
Now that worked for Preset 1 but Im not sure if its different for other catagories ? |
Joshman
Total Posts: 208
Joined 10-28-2013 status: Enthusiast |
Just discovered something else:
Ex: I was controlling the MOXF6 from another midi keyboard when I made the change to a grand piano from my other device/keyboard, I wanted full grand (voice) to appear on the mosf6 but nothing changed on the screen on the moxf until I depressed the Voice button and saw that the change had been made but couldn’t hear the change until I did that.. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
For Normal Voice:
The Bank Select MIDI Data Table on page 123 of the MOXF Data List gives those and the rest. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Under the Bank Select information in the Data List:
A Parameter Change message is SysEx. |
Joshman
Total Posts: 208
Joined 10-28-2013 status: Enthusiast |
MANY THANKS |