Old Motifator threads are available in the Archive.
JimcoSoftware
Total Posts: 6
Joined 07-13-2008 status: Newcomer |
I’m using a Behringer FCB1010 foot controller with my Motif Classic. I’d like to be able to activate the Play transport control in Song mode via a foot pedal. I can find instructions on doing this with an MFC10, but it uses functions programmed into a foot switch, so I can’t tell what MIDI CC that uses. Can anyone help me here? Thank you! Jim |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
It’s not a CC, it’s a Song Start message. There are also Stop and Continue msgs. Check the Data List for the contents of these messages. |
JimcoSoftware
Total Posts: 6
Joined 07-13-2008 status: Newcomer |
Thanks, Meatballfulton. That’s very helpful. I wasn’t even aware of the data list. Unfortunately, I’ve found out that the Behringer FCB1010 doesn’t have the ability to transmit real time system messages, so I’m out of luck. Jim |
msr
Total Posts: 250
Joined 03-31-2006 status: Enthusiast |
Not sure about the MO classic, but I have a normal sustain pedal hooked up to start/stop the sequencer on my MOES7 through one of the pedal inputs on the keyboard. You have to configure to pedal input to do this. I also have a FCB1010 and I know you can set up the foot switches to act as a sustain pedal (either latching or not). I’m not in my studio, so I can’t tell you exactly how, but I have done it before. msr |