Old Motifator threads are available in the Archive.
dglux
Total Posts: 7
Joined 12-31-2009 status: Newcomer |
Hi Can I use the motif XS effects as a plug-in into digital performer without recording the effect? Am thinking of using the effects on my motif XS6 in real time because its sounds better to me than some of the effects that came with digital performer 5.13. Thanks for any help! |
Dreamflight
Total Posts: 2688
Joined 03-07-2008 status: Guru |
I don’t use Digital Performer, so I can’t comment on the specifics of that, but speaking in general terms you would use the XS to apply FX to your monitor mix as follows: You will need 4 inputs and 4 outputs on your soundcard if you are doing this using analogue connections only. I’ll assume you are not using mLAN (please let me know if you are) Assuming you use your soundcard ports as follows:
Outputs:
Inputs:
- Route the track(s) you want to process with the XS to a spare pair of outputs on your soundcard (ie: 3 & 4). You could do this using a send/return configuration via an Aux bus or you could do it directly using output assignments in your software.
Using a send/return setup you can control the wet/dry mix from your DAW. Using direct output assignments, you would control the wet/dry mix on the XS.
- Connect these outputs to the XS A/D inputs - Configure the XS A/D effects however you want, so they process this incoming audio - Connect the XS main L/R outputs to a spare pair of inputs on your soundcard (ie: inputs 3/4) - In your DAW, route inputs 3/4 on your soundcard to your main monitor mix on outputs 1/2. Your main mix will now contain the hardware FX from the XS, but only for those channels you send to the XS for processing. Df. |
dglux
Total Posts: 7
Joined 12-31-2009 status: Newcomer |
Thanks a lot Dreamflight this info was very helpful. If I have anymore question I will post my question here. Thanks again and much success to you and your family for the new year. |
robert30dcosta
Total Posts: 1
Joined 12-24-2010 status: Newcomer |
thanks for sharing. |