mySoftware [Updates]
Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.
newProducts [YOK]
Old Motifator threads are available in the Archive.
Viewing topic "How to connect from AUX Out to consumer camcorder?"
Posted on: January 29, 2010 @ 09:27 PM
| philharmonicguy
Total Posts: 1
Joined 01-28-2010 status: Newcomer |
My instrument has two AUX OUT 6.5mm(Phone; L/L+R, R) and my canon HF100 camcorder’s mic input hole is 3.5mm. Do you know any device can be used for connect each other? Thanks! |
Posted on: January 31, 2010 @ 08:24 PM
Dreamflight
 Total Posts: 2688
Joined 03-07-2008 status: Guru |
A straightforward Y-cable with the appropriate connections on each end should do the job just fine. If the camcorder’s mic socket is expecting a microphone level signal then you’ll need to have the input gain set to minimum and probably set the output level of your instrument very low also. Df. |
Previous Topic:
‹‹ voice is cutting short when recording Next Topic:
Yamaha Pocketrak 2G ››
‹‹ voice is cutting short when recording Next Topic:
Yamaha Pocketrak 2G ››