Old Motifator threads are available in the Archive.
DDS
Total Posts: 2
Joined 05-26-2009 status: Newcomer |
I have recorded on my Motif and saved my files to a Smart Media Card. I am now trying to transfer my beats into my Pro Tools but I am not successful with this. Does anyone know what it is that I need to do? |
dafingaz
Total Posts: 3350
Joined 07-13-2004 status: Guru |
You need to hook up your Motif to the ProTools interface (i.e. MBox, Command 24, etc.) via the outputs on the back. You can then record each track into a ProTools session and do further processing in ProTools. I know there are some setups to change in the MIDI setup in ProTools. What I do is record the Motif tracks into my Yamaha AW16G and then burned each track to a CD and import that into ProTools. My workflow would be easier with the AW1600, but this works also.... |
Wellie
Total Posts: 6215
Joined 05-09-2003 status: Guru |
DF has pointed you in one direction and that woudl be a fab way to achieve audio in PT.
Another option is to resave your beats as midi files (SMF) and then IMPORT into PT as MIDI data. Then you can use PT to manipulate the MIDI further.
The advantage of this method is that the MIDI tracks will automatically be in-sync. Hope this helps Cheers |
amayhem
Total Posts: 58
Joined 05-27-2009 status: Experienced |
One question about this, how would I get the actual sound into the pro tools session tho? Am I wrong in saying Midi Doesn’t actually carry sound, just a signal? I am confused. Please help I’m trying to get this done as well. As of right now I’m using the DL approach and well I’ve had timing issues. -Mayhem |
jkristos
Total Posts: 11
Joined 02-15-2009 status: Regular |
That is correct. In either case the end result would be recording each audio track in as well if your goal is to mix the audio. The difference in the two methods is in whether you also record the midi data to pt to work with before recording in each audio track, or whether you work with the MIDI purely within the Motif before recording that audio. For flexibility of arrangement of sounds, you would leave it in MIDI until you’re done in many cases (though whether you want to do this can depend on genre in some cases). Whichever way you go, you will ultimately have the most control over your final mix if you do your mix (in audio) in PT. |
Louder_Than_Good
Total Posts: 302
Joined 07-30-2002 status: Enthusiast |
Hi Mayhem - That’s right, the MIDI is just a signal. That’s why Wellie said the next part. What you do is (after the MIDI track is safely in ProTools) you play the MIDI track in Protools, with the channel output being the Motif (instead of your studio monitors)! Then the Motif turns right around and sends the audio back to ProTools, which has a track ready to record it, just as if it were a singer in a microphone. It sounds confusing, but once you have done it a few times, it becomes automatic. Just remember to turn the local sound off in the Motif when Protools is sending the MIDI track to it, otherwise you will have double notes. |