Old Motifator threads are available in the Archive.
JustMotivated
Total Posts: 35
Joined 03-10-2009 status: Regular |
My problem is:
I saved a mixing on my Motif XS7 from a current pattern by “Put” command to the mixing template No.32. Important: Two tracks of the pattern contained two customized and saved mixing voices, say “MyMixVoice1” and “MyMixVoice2”.
THE MIXING VOICES ARE NO LONGER ASSOCIATED WITH THE TRACKS !!! Pattern Screen (Track Section) says: “Initialized Voice” instead of “MyMixVoice1, MyMixVoice2” and they sound like “Full Piano Grand” (which is the default for Initialized Voice). I know that copying mixing voices from a previous saved mixing template “manually” is possible, but shouldn’t this be done automatically by recalling a mixing template ? Solution suggestions ? |
JustMotivated
Total Posts: 35
Joined 03-10-2009 status: Regular |
Ok, I think I figured it out:
A Mixing Voice is always associated with the Pattern or Song, not with the Mixing Template !
I would have appreciated using the Mixing Template as container for not only exchanging Mixing Settings but also Mixing Voices.
|
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
The MIXING VOICES you created were replaced with “Initialize Voice” because your Mix Voices had user samples in them. Did they not? The “Initialized Voice”, by the way, has a single waveform, 0001, assigned to Element 1, with an organ-type envelope and not much else programmed. The first waveform in the XS happens to be an acoustic piano wave. Although your thinking of moving the Voices selected in your MIX to a new PATTERN is valid, and it does and will work for normal Voices. If a Voice contains RAM samples (user samples), storing them in a TEMPLATE (even just to copy them) will not be possible. The TEMPLATE stores parameter data in FLASH ROM. So you can have 32 MIXING setups backed up in permanent memory. There is no permanent memory to back up User Samples. So your MIX Voices indeed did show up… the RAM samples were initialized and the XS is correctly reporting that the Voice data has been initialized… because there is not backup for samples or Voices that use RAM samples. There are many workarounds you can find for things in the XS, but backing up samples in FLASH ROM is not one of them. There is no backup memory for volatile ROM in the Motif XS. If you wanted to copy a PATTERN from one location to another the COPY PATTERN job is the way. If you need to copy a SONG from one location to anothe the COPY SONG job is the way to go. |