Old Motifator threads are available in the Archive.
nicethings
Total Posts: 19
Joined 09-18-2008 status: Regular |
Hi There I’ve just updated to the new FW drivers, which informed me in the Install PDF’s that I had to get rid of Mtools.... Now for the life of me I cant get a sound out of my Motif XS6 into Ableton Live under this new driver, whereas it ran along no problem previously, please say its me and my foolishness… If not, can I change back to the Mlan manager? Even though it crashed out cubase 5, atleast I had some control… UPDATE - Its OK, I think I’ve worked it out now… I have to say these new drivers are worse than the previous Mlan manager… As I havent been able to find a way to have any configuration that let’s me hear the Motif without using a DAW???? I thought they were going to fix that? Atleast before you could make templates… |
Yamaha_US
Total Posts: 2540
Joined 07-19-2002 status: Moderator |
“As I havent been able to find a way to have any configuration that let’s me hear the Motif without using a DAW???? “ There is a parameter in the Utility Mode, F2 - I/O called mLAN Monitor Setup. There are three parameters. (Stand Alone) , (With PC) (With PC Direct Monitor)
Stand Alone
With PC
With PC (DirectMonitor)
note: When “with PC†is selected, there may be a short delay
note: Set this parameter to “stand alone†when the MOTIF XS is not connected to an external device via an IEEE1394 cable. |
nicethings
Total Posts: 19
Joined 09-18-2008 status: Regular |
Thanks for the reply, but using analogue jacks to hear a keyboard which has digital audio connectivity with 16 outputs, doesent make sense to me?… Why did I bother buying a £260 MY16E card if I have to use jack leads all the time? The real question is; can I get my Moitf XS to make a sound without going back to analogue leads or having to open a DAW every time I want to hear it? I hope there can be, otherwise its a bit of a con, isnt it? |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
I’m not at all sure what you are talking about here. MY16E??? what is that? We hope you mean you have an mLAN16E2 if you have an XS otherwise it is no wonder you are having an issue.
The MY16mLAN is an expansion card for Yamaha digital mixers.
So maybe that is just a typo, right. You do have an mLAN16E2. The mLAN16E2 turns your Motif XS into your soundcard. Think of the soundcard in your computer (small PCI board probably)… with speakers connected to it. The mLAN16E2 talks the place of that for both MIDI and AUDIO going into and back out of your computer. And, yes, you have to connect the Motif XS to a pair of speakers to hear it. It is your soundcard. The way it outputs audio to speakers is via regular analog cables. That has not changed. You can certainly play your Motif XS whether your computer is on or off. That has not changed. But you must connect the Left and Right outputs on the back panel to some kind of sound system. Or use headphones (they are available, that has not changed). We think you are not understanding what is on offer. The 16 audio bus outputs allows you to deliver audio to Cubase from your Motif XS and/or from signals plugged into the AD INPUTS. In order to hear your audio the signal is routed to the soundcard (mLAN16E2) which routes it to the L&R;outputs of the XS - which you connect to speakers. Image Attachments
|
nicethings
Total Posts: 19
Joined 09-18-2008 status: Regular |
Sorry I made two mistakes… I actually meant to write ‘mLAN16E2’, also I forgot to mention its connectect up to a Yamaha N12 mixer, and since I upgraded the new FW drivers the mLan manager and its graphic patchbay are now un-usable (infact, it wont let you have them on the same system). Thats why I asked the previous question, as I dont fancy un-pluging my mackies everytime I dont wont to use a DAW, just to hear the Motif XS, or going back to pluging jacks into a digital mixer thats connected to a keyboard with a digital audio output card… as I feel it defeats the purpose… Can I hear my Motif XS without using Jacks? Hope this makes a little more sense |