Old Motifator threads are available in the Archive.
cbr_case
Total Posts: 29
Joined 02-28-2017 status: Regular |
Hi Folks, im am trying to integrate my XS into CubasePro 9.
To have the XS playing nice, i already created two buttons in the midi-device definition of cubase:
There is just one more point: I cannot use the first pattern as ‘empty default’, because i use the XS in a live setup, too. So i’ll have to switch to the last pattern (64) manually.
It would be nice if that could be done via MIDI.
Even nicer would be, if I could also switcht to the ‘Pattern MIX’ display via midi. Does anybody know how to achieve this?
best,
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum.
MIDI Song Select works in both Song and Pattern modes with the XS.
To select Pattern 64, the XS should be sent F3 3F If, or how, that can be accomplished in Cubase I’ll leave to you.
Â
I’m unaware of any MIDI message that could select the MIX display. |
cbr_case
Total Posts: 29
Joined 02-28-2017 status: Regular |
Rehi and thanks for the welcome!
SongSelect seems to be a problem in cubase ever since.
Defining a master which loads pattern 64.
The activation sequence would then be:
-Switching to master mode (via sysex)
i’ll try that.
best,
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
That should work, except selecting a Master number can only be done with a Parameter Change SysEx message (not Program Change). |