Old Motifator threads are available in the Archive.
drerwc
Total Posts: 21
Joined 11-01-2016 status: Regular |
I’m talking specifically about the 1972 organ voice. That seems to be the closest sound to “Born To Be Wild” but it doesn’t have Leslie on the mod wheel. I’ve tried layering it with another voice that did have Leslie control but it kind of muddled the voice.
|
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
Have you changed the Insert Effects yet? If Insert B is the Distortion amp, then change Insert A to the same as Insert B and then change Insert B to the Rotary Speaker effect. Hope this works for you! -Max |
drerwc
Total Posts: 21
Joined 11-01-2016 status: Regular |
I will try that! Thanks! I’m assuming I start with “edit” button then look for “insert effects” as an option.
|
Mighty Motif Max
Total Posts: 317
Joined 04-30-2016 status: Enthusiast |
In Voice mode: Press the Edit Button. Then go to the Effects tab. From there go to Ins. B. Change that to Rotary Speaker. Go to Ins. A. Make that the same as the old Ins. B effect. If you like what you have when you are done, save it. Press the Store button and select a location. Press enter and the Yes button. There it is, saved and all. -Max EDIT Sorry! I forgot to check your profile to see what instrument you have! I have a Motif XF, not a MX series instrument. These instructions may not work on your MX. They are for a Motif XF. SORRY!!!! |
drerwc
Total Posts: 21
Joined 11-01-2016 status: Regular |
No worries! I just found out the the MX only has one insert effect per voice rather than two.
|
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
The Rotary effect has parameters called Drive, one each for the horn and Rotor. See if that gives you enough distortion. |
drerwc
Total Posts: 21
Joined 11-01-2016 status: Regular |
Interesting! Thanks for the tip! I’ve been tweaking and layering different voices for over a week now and just can’t get it. I would pay good money just for that voice. |