Old Motifator threads are available in the Archive.
Idan-keys
Total Posts: 5
Joined 01-27-2019 status: Newcomer |
Hello ES6 Users..I would like to know if it is possible to send a program change to the ES6 from Computer Software(gig performer) in MASTER MODE? If yes, how do i get it done? please and thanks! |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum.
I’m presuming that by “program change” you want to change the Master number. To do so via MIDI requires sending a Parameter Change message (SysEx):
Example:
|
Idan-keys
Total Posts: 5
Joined 01-27-2019 status: Newcomer |
Are there guide or tutorial of some sort that could show me how to get this done? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
The ability to send a SysEx message to the Motif is dependent on the computer software being run. This thread addresses doing that with Gig Performer:
I suggest checking the Gig Performer User Guide to see if the version you have will work, or join the forum there and ask for further details. |
Idan-keys
Total Posts: 5
Joined 01-27-2019 status: Newcomer |
Thank You! Got everything working as desired, one problem is, what command do i use for patches 11-16? since F0 43 10 7F 00 0A 00 00 10 F7 would jump me to bank B1? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome. Data bytes in the MIDI message are in hexadecimal (base 16). We usually use decimal numbers (base 10, 0~9) in our day-to-day dealings. Alphabetic characters (A~F) are used to represent certain numbers in hexadecimal.
Some examples:
https://en.wikipedia.org/wiki/Hexadecimal See the ES Data List, MIDI Data Format on page 63, for a conversion chart. |
Idan-keys
Total Posts: 5
Joined 01-27-2019 status: Newcomer |
Ahhh! Thank you so so much!! These were very helpful |