Old Motifator threads are available in the Archive.
lexe-motifxf
Total Posts: 2
Joined 04-05-2017 status: Newcomer |
Hey.
I use Motif XF6 and Roland G8. I control the xf via midi from my G8.
But: in performance mode on the XF(xf) it isn’t possible to change the user-banks (control on G8!). It only works in user1. In voice mode every user-bank-changes work perfectly. A friend of mine has the same problem but both of us can’t explain why it doesn’t work. I hope someone understand my problem an can help :-) THX |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum.
The following is from page 127 of the XF Data List (http://download.yamaha.com/file/52366).
If Bank Select works for Voice mode, it should work for Performance mode as well. If not, make sure the G8 is sending those numbers - some devices count starting at 0(zero), others start with 1(one). Using MIDI-OX (http://www.midiox.com/), I verified that the MSB/LSB above work when the XF is in Performance mode. |
lexe-motifxf
Total Posts: 2
Joined 04-05-2017 status: Newcomer |
Hey, thx for answering.
I’ll try it with your parameters (63/65).
|