Old Motifator threads are available in the Archive.
macdan65
Total Posts: 2
Joined 04-12-2012 status: Newcomer |
Hey folks, New to the Motif family after being a hardcore Korg user for 20+ years. Glad I made the switch. Awesome board!!! Thank you, Yamaha!! My question is probably simple: I like to split layer sounds across the board. That part is no problem in performance mode. I want to be able to control the octaves in the splits of each voice and control if they are sustained or not. Is there a way to do that in performance mode or do I have to write a voice to the user bank that has the octave I need in the register I assign to the performance? Thanks a bunch!! Mac |
sciuriware
Total Posts: 9999
Joined 08-18-2003 status: Guru |
Welcome.
A split in a Performance is called a Part.
Please read page 110 of the reference manual.
If you don’t have the manual, it is 36Mb (to big to attach here),
http://download.yamaha.com/search/product/ ;JOOP! |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
You can also customize which PARTS respond to controllers.
From your PERFORMANCE
There are two levels of editing: The COMMON and the PART
Press [COMMON EDIT] to see and access the overall settings
Both NOTE SHIFT (which lets you shift the pitch of each PART)
Press PART SELECT [1] to view PART 1’s parameters
Press [F6] RCV SWITCH to view the controllers for each PART. A red check means the controller is active. Clear the box to make it inactive for that PART> Press [STORE] to update your PERFORMANCE> |
macdan65
Total Posts: 2
Joined 04-12-2012 status: Newcomer |
Thank you!....Just what I was after!!!! |