Old Motifator threads are available in the Archive.
hammondcuni
Total Posts: 55
Joined 12-28-2003 status: Experienced |
Hope I can explain my question. I have sampled an organ sound that requires the original “release” to be sampled so that it can sound the same. Using samplerobot I accomplished this. The sample is a wav. file for each key or note plus a file for each release. Example: c#1 wav. c#1 wav. release. This is done for all my keys. The program that is set up to keymap this is called Dimension LE. Plays perfect all I do is export to this program from sample robot and done. But not a practical set up for me live. Laptop,interface, keyboard controller etc. I want to try and load these files into the XF. I already did this at Guitar Center yesterday with the instructions I got from BadMister and it worked perfect except the release files. Is there any possible way to have these files mapped into XF so that each note can play with release? Thanks |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
What is a release file? |
hammondcuni
Total Posts: 55
Joined 12-28-2003 status: Experienced |
The samplerobot program samples the note, in this case an organ sound, when the key is released it creates a seperate wav.file to capture the release “sustain” effect of this organ which is a Hammond B200.
Thanks |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
Not sure if I got the answer - ? |
John Melas
Total Posts: 271
Joined 10-31-2002 status: Enthusiast |
I believe what you asking for is being able to trigger the “release file” when you release a key (on key off). This is not supported by the Motif XS/XF in Sampling Mode (there is no such Keybank parameter) but this is perfectly doable from Voice Mode. Create a new Voice and select your “release file” as a Waveform for an Element. Be sure to change the “XA Control” parameter of the Element to “Key off sound”. Now when you release the key you will be hearing that “release file”! Hope this helps! |
hammondcuni
Total Posts: 55
Joined 12-28-2003 status: Experienced |
John so I would then layer the actual organ sound on top of the release voice? Then play like a layered sound? Also what Motifs can do this? XF& XS? |
John Melas
Total Posts: 271
Joined 10-31-2002 status: Enthusiast |
Exactly. The normal organ sound should be in a different Voice Element with “XA Control” = “normal”.
The “XA Control” feature is available in all XS series synths (XF, XS, S90 XS/S70 XS, Rack XS). |