Old Motifator threads are available in the Archive.
ctyelvis
Total Posts: 11
Joined 06-20-2018 status: Regular |
I have the PLG AN & DX boards mounted in my ES Rack.
I’ve made no modifications to anything with the ES Rack or cards. I’m using a Novation 49SL as my controller using standard MIDI cables.
Thanks in advance,
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum.
You might find this thread interesting…
|
ctyelvis
Total Posts: 11
Joined 06-20-2018 status: Regular |
:-)
It’s strange, just that first PLG150DX patch is not working. All the other DX sounds work ok. LoL Although I’m 55, its been a long time since I have messed with this kind of stuff. So I’m pretty much a noobie at this point. I appreciate your patience. :-)
The firmware update did not solve the problem. :-(
Thanks again!!
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
A bit of background information might help…
The Plug-in Voices can be edited and stored in the Rack ES memory. Doing a factory reset would normally restore the Plug-in Voices to original settings. However, you previously mentioned that you did so without the Plug-in Voice A01 issue being resolved, which is surprising. You might look at A01 in Edit mode, and see which Board Voice is assigned for the Oscillator. You could then verify whether that Preset Board Voice is OK - perhaps select a different Board Voice for A01 Oscillator and determine if it then produces sound. See page 76 of the Rack ES Owner’s Manual for details.
You might find this support information of interest:
|