Hi I just bought a MOXF and there are some sounds from my Motif classic that I would like to convert to the MOXF I just wonder if somebody knows how t o do it.

Welcome to the forum.

The Classic Voices are available in ES Editor format at:
http://www.motifator.com/index.php/support/view/motif_classic_voices_in_motif_es_voice_editor_format

I’ve downloaded the http://www.motifator.com/storage/support/MotifPre.zip file, separately loaded the three banks to my Motif XF and saved them, then created an “All Voice” file that incorporates all three Voice banks. That file has been zipped and attached. You should be able to load all or selected Voices to your MOXF. Note that (as the support article mentions) the sounds might vary from what they were like on the Classic.

ClassicMotifVoices.n3.X3V.zip  (File Size: 117KB - Downloads: 966)

5pinDIN - 01 September 2014 12:32 AM

Welcome to the forum.

The Classic Voices are available in ES Editor format at:
http://www.motifator.com/index.php/support/view/motif_classic_voices_in_motif_es_voice_editor_format

I’ve downloaded the http://www.motifator.com/storage/support/MotifPre.zip file, separately loaded the three banks to my Motif XF and saved them, then created an “All Voice” file that incorporates all three Voice banks. That file has been zipped and attached. You should be able to load all or selected Voices to your MOXF. Note that (as the support article mentions) the sounds might vary from what they were like on the Classic.

Thank you very much, best regards.

lliw - 01 September 2014 03:18 PM

Thank you very much, best regards.

You’re very welcome - I hope that fulfills what you wanted.

5pinDIN - 01 September 2014 03:32 PM

lliw - 01 September 2014 03:18 PM

Thank you very much, best regards.

You’re very welcome - I hope that fulfills what you wanted.

Yes it did it thanks again.

Judging from the downloads, I’d say it’s fulfilled many peoples wants lol :)

TiasDad - 01 September 2014 06:06 PM

Judging from the downloads, I’d say it’s fulfilled many peoples wants lol :)

Either that, or they’re just curious.  :-)

Are the Motif Classic sounds different than the sounds on the MOXF, or are they slightly different?

Thanks!

R.U.doin - 02 September 2014 03:08 AM

Are the Motif Classic sounds different than the sounds on the MOXF, or are they slightly different?

Thanks!

Some of the Voices from the Classic are similar to Preset ones in the MOXF, and some are significantly different. If interested, why not back up your current Voices with an “All” or “All Voice” file, and try the Classic ones?

Do you have a flash module installed in your MOXF? If so, be careful when reloading your data to avoid Waveform duplication.  See pages 155-157 of the MOXF Reference Manual for file Save/Load information.

5pinDIN - 02 September 2014 08:37 AM

R.U.doin - 02 September 2014 03:08 AM

Are the Motif Classic sounds different than the sounds on the MOXF, or are they slightly different?

Thanks!

Some of the Voices from the Classic are similar to Preset ones in the MOXF, and some are significantly different. If interested, why not back up your current Voices with an “All” or “All Voice” file, and try the Classic ones?

Do you have a flash module installed in your MOXF? If so, be careful when reloading your data to avoid Waveform duplication.  See pages 155-157 of the MOXF Reference Manual for file Save/Load information.

Thanks! I don’t have any sounds installed, so the usersounds are all copies from presetsounds, so I guess I don’t have to save the sounds befor installing the Motif Classic sounds.

I’ll definitly have a listen!

Rudo

R.U.doin - 02 September 2014 10:02 AM

...Thanks! I don’t have any sounds installed, so the usersounds are all copies from presetsounds, so I guess I don’t have to save the sounds befor installing the Motif Classic sounds....

“Sounds” aren’t the only thing that will be overwritten.  ALL USER data will be overwritten upon installing an ALL File.  For example, any settings you have changed in the System Utilities will be lost, unless you are quite careful (i.e. be sure “with system” is unchecked).

Do yourself a favor, and SAVE an ALL File to USB before LOADING another ALL File, as suggested.  What can it hurt?

R.U.doin - 02 September 2014 10:02 AM

Thanks! I don’t have any sounds installed, so the usersounds are all copies from presetsounds, so I guess I don’t have to save the sounds befor installing the Motif Classic sounds. [...]

Since the file I posted is an “All Voice"/.X3V one (not “All"/.X3A), if loaded in entirety it should just replace the MOXF’s User Voices, and not affect other User data such as Utility settings. Nevertheless, saving an “All” or “All Voice” file before loading new data is probably a good habit to get into. There are certainly posts on Motifator where the OP bemoaned the loss of data because a backup hadn’t been made and something unintentional happened.

Thanks for the advice. I allready have an “all” file on teh USB stick mainly because of the songs. everytim before I turn off teh synth I store and save all data!

Rudo

Thanks for this sharing. Very much appreciated.

MamieNova - 07 September 2014 02:39 PM

Thanks for this sharing. Very much appreciated.

Welcome to the forum.

purcell - 10 September 2014 10:51 AM

ClassicMotifVoices.n3.X3V.zip (File Size: 117KB - Downloads: 66)

MORE OF THAT!!! PLEASE! It´s wonderful!…

Is it possible,
to put some more of that voices (from XS,ES etc.), in here?

Just the way you did it? ... “ClassicMotifVoices.n3.X3V.zip”

I’m fairly sure I previously posted the ES Preset Voices, but I can’t seem to find the post. I’ve attached two files, covering ES Preset banks 1/2/3 plus Drums 1~32 and banks 4/5/6 plus Drums 33~64.

The XS Preset Voices are the same as those found in banks 1~8 of the MOXF.

ES Pre123+Dr1-32.n3.X3V.zip  (File Size: 131KB - Downloads: 706)

ES Pre456+Dr33-64.n3.X3V.zip  (File Size: 141KB - Downloads: 728)