mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]


forumforum
 

Old Motifator threads are available in the Archive.

Viewing topic "Motif XS8 mLan plus extra midi out"

     
Posted on: July 08, 2020 @ 04:22 PM
ashbeauty
Total Posts:  18
Joined  05-30-2011
status: Regular

I need an extra midi out, I think. I recently started using Mac/MainStage patches to add new sounds and am trying to find a set-up to include them in the mix. So far, I have to choose between Motif xs8 Control/Midi Interface mLan or USB. I haven’t found a way to get midi out to the mac when it’s set on mLan.

Current set-up for home studio Cubase recording on pc with motif, mac/instruments, mic:

Motif xs8 mLan out to PC/Cubase (Control/Midi Interface is set to mLan)
Motif xs8 midi out to Mac/MainStage (out must be set to USB)
Mac - midi in from Motif xs8, midi out to UMC202HD audio interface
UMC202HD - mic in (phantom), power and audio in from Mac usb, audio out to Motif xs8 audio inputs 1/2

Problem - to use mac midi I can only use it when set to USB (vs mLan) and similarly, to use the mLan, it has to be set to mLan (vs USB).

Is there an extra midi out on the Motif xs8 when the Control/Midi Interface is set to mLan?

I’m sure this would be a piece of cake for one of you - if you’d be so kind as to correct what I’m doing wrong - I’d be most grateful!

  [ Ignore ]  

Posted on: July 08, 2020 @ 07:02 PM
5pinDIN
Avatar
Total Posts:  11891
Joined  09-16-2010
status: Legend

We’ve been down this path before…
http://www.motifator.com/index.php/forum/viewthread/481579/
...and as far as I know, nothing has changed.

It appears that the most recent Yamaha Steinberg FW Driver supports only up to OS 10.14/Mojave. You could try contacting Yamaha Support and/or Steinberg, but I doubt they’ll be helpful. Yamaha apparently has a tendency to abandon support of older models, and the XS is now two generations behind current ones.

If you really need for things to work as you desire, perhaps you should consider abandoning 10.15/Catalina and install 10.14/Mojave instead.

See https://support.apple.com/en-us/HT210190

  [ Ignore ]  

Posted on: July 08, 2020 @ 08:12 PM
ashbeauty
Total Posts:  18
Joined  05-30-2011
status: Regular
5pinDIN - 08 July 2020 07:02 PM
We’ve been down this path before…
http://www.motifator.com/index.php/forum/viewthread/481579/
...and as far as I know, nothing has changed.

Thanks, 5pinDin. I wasn’t trying to use mLan with the Mac, I just need a keyboard usb midi out to send even when using mLan out to my Cubase pc. Is it true that none of the additional 5pin or usb midi outs work if mLan is selected as the primary midi interface?

I did notice there are 2 mLan output jacks so I might be able to use that, but that would be the path you were thinking of that I had asked about earlier.

  [ Ignore ]  

Posted on: July 08, 2020 @ 10:51 PM
5pinDIN
Avatar
Total Posts:  11891
Joined  09-16-2010
status: Legend
ashbeauty - 08 July 2020 08:12 PM

Thanks, 5pinDin. I wasn’t trying to use mLan with the Mac, I just need a keyboard usb midi out to send even when using mLan out to my Cubase pc. Is it true that none of the additional 5pin or usb midi outs work if mLan is selected as the primary midi interface?

OK. Of course, it would have been easy to get the MIDI data you need if mLAN was working with the Mac. However, it is possible to get 5-pin MIDI output from the XS while using mLAN. The trick is to route the data via Cubase by having a track set so that its MIDI Out goes to “MOTIF XS8 MIDI OUT”. The XS8’s 5-pin MIDI-Out will then provide the needed MIDI signal, and could be connected to a MIDI-to-USB interface if needed. Just be aware that most inexpensive MIDI/USB cables don’t work well, so if you do this get something decent.

See the second post in http://www.motifator.com/index.php/forum/viewthread/457221

  [ Ignore ]  

Posted on: July 08, 2020 @ 11:51 PM
ashbeauty
Total Posts:  18
Joined  05-30-2011
status: Regular

“The Trick” - Got it. I will try it and let you know. Thank you, 5pinDin!

  [ Ignore ]  

Posted on: July 09, 2020 @ 08:11 AM
5pinDIN
Avatar
Total Posts:  11891
Joined  09-16-2010
status: Legend
ashbeauty - 08 July 2020 11:51 PM

“The Trick” - Got it. I will try it and let you know.

I can assure you that this will work if the ports are properly assigned - I’ve used this approach myself.

 

ashbeauty -

Thank you, 5pinDin!

You’re welcome!

  [ Ignore ]  


 
     


Previous Topic:

‹‹ Complete Orchestra Question
Next Topic:

    Can The Motif XS do This With Midi? ››