Propellerhead says I have to configure MOXF6 to do so.
Let me explain what I achieved so far:

- I can use MOXF to control Reason Sounds;
- I can use MOXF’s A/D Input to record audio from bass, guitar, mics etc.

What I can’t do at the moment is record the audio directly from the MOXF.

Please note that MOXF is connected via USB, so I’m trying to do this without having to change cables and connections.

Any help is highly appreciated.

Thanks!

Have you installed the appropriate Yamaha Steinberg USB Driver on your computer?

Hi 5pinDI,
Yes, I have the latest Yamaha Steinberg USB Driver installed.

Do you suggest something?

Thanks for answering!

viktorlima - 02 July 2018 03:31 PM

Hi 5pinDI,
Yes, I have the latest Yamaha Steinberg USB Driver installed.

Do you suggest something?

I don’t use Reason, so I can’t be specific. However, do you have the YS USB Driver selected as the ASIO driver in Reason?

If the driver is properly selected in Reason, then I’m not sure what else might be the difficulty. This article, although concentrating on Cubase, has some basic information that might be applicable to setting up a MOXF with other DAWs such as Reason:
http://www.motifator.com/index.php/support/view/moxf6_moxf8_basic_audio_recording

 

viktorlima -

Thanks for answering!

You’re welcome. Good luck.

viktorlima - 02 July 2018 12:33 PM

What I can’t do at the moment is record the audio directly from the MOXF ...

The moXF should appear as an audio input in your ASIO settings (you need to enable ASIO to be able to record the audio). I have reason installed, but I haven’t tried to record the moXF through it. Hope this helps.

viktorlima - 02 July 2018 12:33 PM

I can use MOXF’s A/D Input to record audio from bass, guitar, mics etc.

What I can’t do at the moment is record the audio directly from the MOXF.

Please note that MOXF is connected via USB, so I’m trying to do this without having to change cables and connections.!

If you can already record audio from basses, guitars and mics via the MOXF’s A/D input to Reason, you might not know that the voice audio from the MOXF defaults to USB outputs 3 & 4, instead of 1 & 2.

The solution should be to make sure that the inputs of any audio tracks you want to record MOXF voice audio on are set to 3 & 4.

philwoodmusic - 02 July 2018 06:00 PM

viktorlima - 02 July 2018 12:33 PM

I can use MOXF’s A/D Input to record audio from bass, guitar, mics etc.

What I can’t do at the moment is record the audio directly from the MOXF.

Please note that MOXF is connected via USB, so I’m trying to do this without having to change cables and connections.!

If you can already record audio from basses, guitars and mics via the MOXF’s A/D input to Reason, you might not know that the voice audio from the MOXF defaults to USB outputs 3 & 4, instead of 1 & 2.

The solution should be to make sure that the inputs of any audio tracks you want to record MOXF voice audio on are set to 3 & 4.

Hi again,
Thank you all for the help and patience!

philwood, this is exactly what I needed! Thanks!