Old Motifator threads are available in the Archive.
Proxima
Total Posts: 4
Joined 01-02-2015 status: Newcomer |
I have a mox8 attached to a Behringer Passive DI box, connected to a single EV ELX112P. Not only is the sound quality complete garbage out of this supposedly “good” speaker, there is a very VERY loud hiss, even at low gains. I thought a DI box would solve the hiss problem, but it didn’t do ANYTHING. I don’t understand what the problem is. I have an amazing keyboard, a highly regarded stage monitor, and a decent DI box and yet the sound quality and hissing is complete crap. Someone please tell me what I’m doing wrong. I don’t understand how all this expensive equipment I spent thousands of dollars on can sound worse and create worse ground loop than my $50 12 year old Yamaha. (And yes, I have messed with the FEG, AEG, and EQ levels on the keyboard and the speaker). Thanks. |
zpink
Total Posts: 427
Joined 08-02-2014 status: Enthusiast |
Hi there
Do you have it connected to a PC with a USB cable?
|
MrMotif
Total Posts: 1122
Joined 10-02-2002 status: Administrator |
It sounds like you’re using speaker cable instead of (shielded) instrument cable. Might I also ask why you are using the DI box? You can connect directly from the instrument outputs to the mixer on your EV. Either way, check your cables! |
meatballfulton
Total Posts: 3022
Joined 01-25-2005 status: Guru |
Is it hiss or hum? You mentioned a ground loop...that’s hum. |