mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]


forumforum
 

Old Motifator threads are available in the Archive.

Viewing topic "Controller for bass, XS6 for keys"

     
Posted on: October 11, 2017 @ 11:52 PM
starscreamer
Total Posts:  3
Joined  02-14-2011
status: Newcomer

Is it possible to setup an XS6 and midi controller in such a way that the all 49 keys of the controller are dedicated to bass, and the XS6 covers the keys only? I currently use just the XS6 in performance with a split, but with only 61 keys, I’m very limited in note range. I want to add the controller to extend the range. I basically want two keyboards, one bass, and one keys.

Thanks

  [ Ignore ]  

Posted on: October 12, 2017 @ 12:21 AM
cmayhle
Total Posts:  3116
Joined  10-05-2011
status: Guru
starscreamer - 11 October 2017 11:52 PM

Is it possible to setup an XS6 and midi controller in such a way that the all 49 keys of the controller are dedicated to bass, and the XS6 covers the keys only? I currently use just the XS6 in performance with a split, but with only 61 keys, I’m very limited in note range. I want to add the controller to extend the range. I basically want two keyboards, one bass, and one keys.

Thanks

You use Master Mode.

You set up (1) ZONE in Master Mode (Associated with a SONG or PATTERN MIXING for best results) to allow the controller to play a bass VOICE(PART) of your choosing, on a MIDI channel of your choosing.

That allows up to (7) additional ZONES to be utilized by the XS internally, with VOICES(PARTS) of your choosing, on up to (7) additional MIDI channels, with all (8) of your sliders controlling the mix, (1) slider per ZONE.

The place to start with Master Mode is This Article.

After going through that, post back with questions.

EDIT:  The reason you will use SONG or PATTERN Mode, with MASTER Mode, Is that those are the (2) Modes that allow for simultaneous performance on multiple MIDI channels...which will allow you to use the external controller in the manner you desire.

  [ Ignore ]  

Posted on: October 12, 2017 @ 12:24 AM
starscreamer
Total Posts:  3
Joined  02-14-2011
status: Newcomer

Thanks!!!

  [ Ignore ]  

Posted on: October 12, 2017 @ 11:44 AM
starscreamer
Total Posts:  3
Joined  02-14-2011
status: Newcomer

Ok, I have a follow up question. I have the zones working… thanks, now is it possible to bride the transpose key across both boards, so that a change to one, effects both?

Thanks

  [ Ignore ]  

Posted on: October 12, 2017 @ 06:10 PM
cmayhle
Total Posts:  3116
Joined  10-05-2011
status: Guru

I don’t know of a way to activate Transpose on an external ZONE using the front panel Transpose button. My understanding is that the transpose button will act exclusively on the internally addressed PARTS.

If that is not the case, hopefully someone will chime in.

  [ Ignore ]  


 
     


Previous Topic:

‹‹ Guide - Network Connection with Android
Next Topic:

    Liquido narcotic soundset for motif xs ››