Old Motifator threads are available in the Archive.
rome
Total Posts: 6
Joined 05-23-2014 status: Newcomer |
Mr.Stone thanks for the reply, I have closely followed your directions even though I had already done these settings but the volume pedal also acts on the sound of CP1 even excluding the piano’s editing pages (common, page 4 and zones 1 and 2 on page 2 FC in OFF) I ask you, have you tried it on a CP1 or you followed the theoretical instruction manual? I have to understand if it’s a firmware bug or I have problem on my CP1 (firmware V1.21) thanks for your reply |
stoneb3
Total Posts: 851
Joined 06-05-2011 status: Guru |
Hello Rome,
Stone |
rome
Total Posts: 6
Joined 05-23-2014 status: Newcomer |
Hello Stone,
Rome |
beeblebrox
Total Posts: 3
Joined 06-16-2014 status: Newcomer |
Hello everyone,
I own a Cp1 upgraded to the latest firmware. It has the same problem described.
I never noticed this problem with previous firmwares, but ONLY because I never used CP1 as masterkeyboard with expression pedal before upgrading. I don’t have hardware with midi-on-usb: so, I cannot tell if this “bug” is noticeable on both 5-pin midi output (that is what I used) and usb midi out. |
digitalperformer7
Total Posts: 253
Joined 12-07-2011 status: Enthusiast |
As far as we know, apparently, Yamaha is aware of this bug but still has to do something to solve it.
|
beeblebrox
Total Posts: 3
Joined 06-16-2014 status: Newcomer |
Thank you for answer.
|
wavesequence
Total Posts: 30
Joined 07-20-2009 status: Regular |
Buy a CP4 and forget aliens :-D |
beeblebrox
Total Posts: 3
Joined 06-16-2014 status: Newcomer |
Good idea… but I’m not used to change instruments for just a sample! I’m still in love with CfIII and S6.
|
digitalperformer7
Total Posts: 253
Joined 12-07-2011 status: Enthusiast |
It’s the same I did, buying Pianoteq 5! ;-) |