Old Motifator threads are available in the Archive.
zoueva
Total Posts: 56
Joined 02-15-2009 status: Experienced |
My n12 mixer stopped controlling Cubase from remote control area on N12. In the past when I opened cubase project Cubase Ready indicator on n12 was lighting up, but not now? what could be wrong?
|
jan bruijn
Total Posts: 4952
Joined 04-30-2005 status: Guru |
I use the N12, with my MOTIFXS8 and Cubase 5.0 as well. However, you provide so little info that it is impossible to determine whats wrong. You wrote it did work before, so what did you change? BTW, what equipment are you using, what software, which drivers did you install etc. etc. Jan |
zoueva
Total Posts: 56
Joined 02-15-2009 status: Experienced |
I have Cubase AI 4 with the latest upgrade (4.5.2), Motif XS6 with MLan with the latest OS (V1.12) and N12 running through Yamaha FW driver. I also updated firmware on N12 to (V1.03) and IEE1394 Firmware to (V1.07). Main problem I have now is that DAW remote control on N12 does not work with Cubase (Cubase Ready Light on N12 does not come up when I start my projects).
|
jan bruijn
Total Posts: 4952
Joined 04-30-2005 status: Guru |
I Suppose you are using a PC, with what XP or Vista 32-bit or 64-bit. Normally speaking. This white ready light should automatically ligth up after Cubase is ready. Which order do you start your equipment? Make sure that the N12 and your XS is powered up first before you start Cubase. I assume you connected Firewire cables from the N12 to the XS and from the XS to the PC, or XS to the N12 and from the N12 to the PC. Otherwise I do not see a problem in your setup. Jan |
frankE
Total Posts: 5350
Joined 12-23-2002 status: Guru |
Does this happen with ALL projects, including a new one?? Have you tried, for example, booting up everything fresh then creating a brand new project (and do not open an old project first)? Let us know.........frank |
zoueva
Total Posts: 56
Joined 02-15-2009 status: Experienced |
I run everything on IMac not on PC. FW cables connected from the Imac to N12 and N12 to XS. No changes even I open a brand new project before an old one, still no light comes up on N12 and no DAW remote control occurs. When I go to System Preferences on imac and then to FW driver and press identify button the Cubase ready indicator lights up for a few seconds.
|
jan bruijn
Total Posts: 4952
Joined 04-30-2005 status: Guru |
Zoueva, Maybe a stupid question. Did you set the XS to FW driver? Using Utility and I think the I/O knob on the XS Jan |
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
Lost track of your other thread… Go to SYSTEM PREFERENCES and find the Yamaha-Steinberg FW icon and open the CONTROL PANEL… Does the Control Panel show the N12 as being connected? Let us know. |
zoueva
Total Posts: 56
Joined 02-15-2009 status: Experienced |
1.FW driver is set on XS utility panel.
|
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
You have donwloaded and installed the NEW Tools for n 2.00 These include the latest Extension for the n-series. |
zoueva
Total Posts: 56
Joined 02-15-2009 status: Experienced |
I have downloaded Tools for N12. Can you teach me how to use Audio Midi setup window to connect N12, XS with Mlan on it? I am lost in all these ports Properties/Ports options there. Would appreciate your expert opinion on connections, though that it can be done automatically but apparently it’s not the case. I think I fixed the problem with remote control with help from Stienberg support email.
Is there any similar tutorials or information for Cubase setup instead of Logic Pro including N12 mixers?
|
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
Yikes, you don’t have to do any of that stuff with Cubase. If you have the Yamaha Steinberg Firewire driver installed on your iMAC, you can go to SYSTEM PREFERENCES there you will see the Yamaha Steinberg Firewire driver icon. Click it it should report that you have the N12 and the Motif XS connected. Let us know what you see. Then if you go on your HD, find APPLICATIONS > UTILITIES > “Audio/MIDI Setup” On the Audio side, select Yamaha Steinberg Firewire Driver (shown in screen shot below) Image Attachments
|
zoueva
Total Posts: 56
Joined 02-15-2009 status: Experienced |
That seems to be clear so far, what do I do with other screen where I should connect MIDI devices and set them up, how do I run wires from one device to another? Can you coment on that?
|
Bad_Mister
Total Posts: 36620
Joined 07-30-2002 status: Moderator |
Firewire: is run just one device to the next (in what we call a ‘daisy-chain’). For example, Computer > N12 > XS Audio: Connect the N12 to your monitor speakers (you can connect up to 3 pair of monitors). Connect the Motif XS to the N12 (use one of the stereo channels 9/10 or 11/12) MIDI: No MIDI Setup connections are necessary as that is all taken card of via firewire. |
zoueva
Total Posts: 56
Joined 02-15-2009 status: Experienced |
Thank you for response, but when I try to add N12 as remote device on Device setup screen I have ! symbol before Yamaha N12 and massage Device failed to open. How can I fix this?
|