Old Motifator threads are available in the Archive.
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
Hello!
|
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
When a Performance (or Voice) is selected from the front panel, the Bank MSB/LSB and Program number are sent from MIDI. That also happens if the Performance/Voice is selected via MIDI. The Program number is, of course, displayed on the LCD. As far as I know, there’s no way to read the Performance/Voice number via MIDI after it has been selected. All of the Performance/Voice Parameters are contained in the Edit Buffer, and a Bulk Dump of the Buffer will retrieve that data, but it doesn’t include the originating location. |
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
Thank you!
And what does the initialization command bulk dump look like? In the data list found DUMP REQUEST (F0 43 2n 7F 1C 00 aH aM aL F7). What do the parameters Address High (aH), Address Mid (aM), Address Low (aL)? What are the values in them to substitute, if it is a global query? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
You’re welcome.
Â
The Bulk Dump contents are typically used to restore data to the Edit Buffer, either as originally dumped or after having been externally edited. From there, a Voice or Performance could be played, or it could be stored to a User location if desired. That seems to meet the usual application for such data, and doesn’t require knowing the original location. If you would explain what your intent is, perhaps there’s a way to accomplish it that isn’t immediately obvious.
Â
See http://www.motifator.com/index.php/forum/viewthread/479046/ |
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
I’m developing a Lemur template that will be linked to the Ableton Liva project. For recording on the fly in audio sound from Yamaha in performance mode. The idea was for the program to memorize the performance parameters for each individual Live’s track. Performances are selected by the performer as they play, recording the sound on different tracks of Live. To do this, I need to get the number of the active performance (or a complete list of parameters) for saving as a property of the Ableton Live track. Then you can return to the performance assigned to each track. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
I have only a vague familiarity with Ableton Live. However, if I understand this…
|