Old Motifator threads are available in the Archive.
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
Hello everyone!
Can I find somewhere undocumented Data List or more information about MOXF-sysex? I found this forum very useful Information on the sysex-command to set the tempo in song-pattern mode (F0 43 10 7F 1C 00 70 00 0B mm || F7).
I was able to empirically to find a combination to change channels in song mode (mixing mode). A double line of command:
F0 43 10 7F 1C 00 0D 00 00 chan
chan: 00-0F If this switch is working - must somehow work and switches for pattern sections. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Welcome to the forum.
Â
This command was originally usable with the Classic Motif and the ES. It is not usable with the Motif XS or XF. The Data List for the MOX and MOXF show it, but there are sometimes errors in the Lists. I don’t know if it will actually work with the MOXF (I have an XS and XF, but no MOXF to check).
ss = Pattern Section A~P, 00~7F (There are no “Sections” in Song Mode.)
For details, see the first post by Bad_Mister in this thread:
See the second post by pmat3155 in this thread:
Â
The Editor communicates via Port 4 - see page 54 of the MOXF Owner’s Manual. If you monitor Port 4 data, using a program such as MIDI-OX, you can operate controls (such as TEMPO) and capture their SysEx. However, note that the Editor uses a different Model ID, so in order to use the message you have to change it - for the MOXF, it’s “1C 00”.
Â
The first of those messages is PART SET CONTROL for MIX VOICE, page 125 of the MOXF Data List. I don’t recognize the second message - what does it do? If you find any undocumented SysEx, please post it. Thanks. |
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
Thanks for the answer!
I would like to in the near future to check all sysex commands (request - answer) with the functions of Lemur. I do not know - as far as it is harmful to MOXF - send him undocumented test sysex commands? |
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
Sysex-command to switch the pattern sections:
F0 43 7E 00 ss 7F F7
It WORKS on the Yamaha MOXF6 in the Pattern mode! |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
Thanks for verifying that. |
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
Hi!
How to create a MOXF tempo request for song and pattern modes?
F0 43 10 7F 1C 00 70 00 0B lsb msb F7
lsb = floor(val / 128) (Round-down to integer value)
Request command not found. |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
See my reply to your related message here:
|
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Hi Can Lemur be used to change tracks/parts in song mode( or pattern mode) to change voices? Thank you |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Can someone please kindly reply my above question ... I am really desperate ! Many thanks |
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
While this is not possible. If by chance there is no “hidden” data about the sysex. I have not found it yet. Here we are actively searching for data on sysex. http://www.motifator.com/index.php/forum/viewthread/479289 |
Vetalexy
Total Posts: 32
Joined 07-20-2015 status: Regular |
To switch the voices you do not need to switch channels. Here are my functions for Lemur:
1. Expression “XVhdr”:
2. Expression “instr_mode”:
3. Function “syxOut”:
midiout(target,{0xF0,msg,0xF7});
4. Function “syxPatch”:
if(instr_mode == 1)
Good luck! |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Thank you for your reply! So are you saying that I don’t need to switch channel even I am playing and changing my sounds by switching different track button in song mode? |
5pinDIN
Total Posts: 11891
Joined 09-16-2010 status: Legend |
To change Parts in a MOXF Song/Pattern via SysEx…
|
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Thank you very much guys…
At the moment I am zero in Lemure.. ! I have to buy and learn that software from scratch and than I will able to grasp more what you have said.
Thanks once again.. |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Hi guys
I am really trying hard to understand Lemur programming but sadly not getting there..
Thank you very much.. |
kvt
Total Posts: 78
Joined 04-30-2011 status: Experienced |
Thank you very much for this.. Is it at all possible can you send me template? It is very difficult for me to understand the programming of Lemur. Thank you |