mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

rssFeeds [Syndicate]


Old Motifator threads are available in the Archive.

Viewing topic "Assignable output distortion"

Posted on: December 08, 2008 @ 01:56 PM
Total Posts:  0
Joined  12-08-2008
status: Newcomer

Has anyone encountered distortion on the assignable output channels?  Our sound guy isolated it.  Apparently, when playing practically any voice/patch with the main volume slider maxed out, the main outputs are clean but the signal from either assignable channel’s output become distorted. 

Anyone aware of a special setting that needs to be tweaked?


  [ Ignore ]  

Posted on: December 11, 2008 @ 05:31 AM
Total Posts:  14986
Joined  07-26-2002
status: Legend

Re: Assignable output distortion

The assignable outputs are not supposed to be affected by the main volume slider… this sounds like a hardware problem.


  [ Ignore ]  

Posted on: December 11, 2008 @ 06:12 AM
Total Posts:  3345
Joined  01-18-2003
status: Guru

Re: Assignable output distortion

B-Webb is right. The “Main Outs"faders donot affect the Assignable Outs. I would check the channel fed into the board you are using and the Voice or Performance Volume settings as well in the ES. You might also check your cables.

I use Assignable Outs and a AIEB2 in Pattern and Performance Modes for one thing or another and have not had that issue. Before you address it from a hardware defect,I suggest you examine the areas I outlined.
Just a thought.........

  [ Ignore ]  


Previous Topic:

‹‹ Repair on File button
Next Topic:

    Motif to ES conversion ››