mySoftware [Updates]

Once you create a user profile on Motifator and update with the appropriate information, the updates shown here will be specific to you.

newProducts [YOK]

rssFeeds [Syndicate]

Forum Home  >  Archives  >  MM6/MM8  >  Thread

forumforum
Search  
  
  Advanced Search

Old Motifator threads are available in the Archive.

Viewing topic "Noisy outputs on my motif 6"

     
Posted on: October 20, 2008 @ 05:10 PM
joski
Total Posts:  3
Joined  03-06-2008
status: Newcomer

The outputs on my motif 6 are very noisy.  Whether I send audio out to my mixer, mbox 2, or MPC 1000, I am getting lots of noise.  Is it true that using an unbalanced cable will alleviate this problem?  This is terrible because this is making it impossible to record.  Any help would be greatly appreciated.

  [ Ignore ]  

Posted on: October 22, 2008 @ 01:06 PM
Bad_Mister
Avatar
Total Posts:  36620
Joined  07-30-2002
status: Legend

Re: Noisy outputs on my motif 6

You posted in the MM6/8 forum - you should have posted in the Motif Classic forum.

But no matter… Source of noise could be something that you have plugged into the AD INPUT jack. We have had many users forget that they have a microphone or other device plugged into the AD INPUT jack or they left the gain all the way up and the MIC/LINE parameter set to mic

Press [UTILITY]
Press [F2] AD
Press [SF1] INPUT
Make sure that your Mic/Line is set to Line

Check the AD Gain knob on the back panel of the Motif.

  [ Ignore ]  


 
     

Previous Topic:

‹‹ how to put new sounds into mm8? Next Topic:

    USB drive ››