Bad_Mister
Total Posts: 36620
Joined 07-30-2002
status: Legend
|
Re: 3 band EQ for Parts in Multi Mode
We are not sure why you never reach it… but let’s make sure you are looking in the right place.
There are two different levels of editing on the Motif-Rack ES.
One is the COMMON area - parameters shared by all PARTS
The other is the PART area - parameters specific to the indiviaul PART, 1 through 16
On the screen when you enter EDIT mode you will see the area you are currently in immediately to the right of the MODE tab. So for example, if you are in COMMON edit your screen will have: MULTI Common
Followed by the [PAGE] screen you are viewing: General, MEQ, CTRL Assign,
To move between COMMON mode and the individual PART Edit parameters you must do the following:
Press the [MUTE/SEL] button.
The Mute / Select buttons is MUTE when lit and SELECT when the LED is off.
You want to turn the LED OFF so you are in SELECT mode… you can then select a PART
Now the row of four buttons under this become the PART Select button.
[1/5/9/13] button will toggle you between PARTS 1, 5, 9 and 13
[2/6/10/14] button will toggle you between those PARTS and so on.
Press the PART you want to EDIT
http://files.keyfax.com/forums/user-files/411906-PART%20edit.JPG
Now you can PAGE [<] or [>] to the following screens: Voice, Output, Tone, EQ, Receive Switch.
Select [EQ]
you can now access your 3-band EQ per PART.
For more on how to navigate the USER MULTI in the Motif Rack ES please see the following: The User Multi PDF article
you can find many more resource articles in the Behind the Manual area on this site
|